no sensor cal drop down

x-faktory · Post by **x-faktory** » Wed Dec 07, 2016 10:15 am

The TunerStudio, tool tab is only providing a TPS cal selection....nothing for temp/thermistor, etc. Do you need to be connected to a live MS unit for this to be accessed and loaded.

Post by **jsmcortina** » Wed Dec 07, 2016 11:19 am

Almost certainly yes.

Connect your Megasquirt ECU and create a new project.

James

kjones6039 · Post by **kjones6039** » Wed Dec 07, 2016 11:21 am

x-faktory wrote:The TunerStudio, tool tab is only providing a TPS cal selection....nothing for temp/thermistor, etc. Do you need to be connected to a live MS unit for this to be accessed and loaded.

Did you try Unlock Calibrations?

Ken

LT401Vette · Post by **LT401Vette** » Wed Dec 07, 2016 12:38 pm

x-faktory wrote:The TunerStudio, tool tab is only providing a TPS cal selection....nothing for temp/thermistor, etc. Do you need to be connected to a live MS unit for this to be accessed and loaded.

It sounds like you have an MS1 project open.

If you do indeed had an MS1, there is no option to calibrate your thermoster or AFR tables.

Megasquirt Support Forum (MSEXTRA)

no sensor cal drop down

no sensor cal drop down

Re: no sensor cal drop down

Re: no sensor cal drop down

Re: no sensor cal drop down