MAF table import/export

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
hoveringuy
Experienced MS/Extra'er
Posts: 172
Joined: Fri Aug 29, 2008 8:52 am

MAF table import/export

Post by hoveringuy »

What's the best way to import/export MAF flow tables, given that there's no function for that like other tables? Copy and paste from an Excel sheet or such?

I've got several MAFs that I'll be switching between.
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MAF table import/export

Post by jsmcortina »

File -> Save Dialog Settings

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
elaw
Super MS/Extra'er
Posts: 2926
Joined: Fri Oct 16, 2009 6:20 am
Location: Wilmington, MA

Re: MAF table import/export

Post by elaw »

At least in the TS version I have, which I think is the latest, you can also select all the cells in the table, press ctrl+C to copy, then paste into Excel. The opposite also works (copy from Excel and paste into TS).
Eric Law
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking

Be alert! America needs more lerts.
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MAF table import/export

Post by jsmcortina »

jsmcortina wrote:File -> Save Dialog Settings

James
Sorry, I didn't realise that this functionality is missing in the "Lite" version of TunerStudio.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply