ms2 afr choices not available

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
waybad
Helpful MS/Extra'er
Posts: 71
Joined: Wed Jan 16, 2013 7:44 pm
Location: Evansville, Indiana

ms2 afr choices not available

Post by waybad »

ok guys I'm still not able to make changes to my afr choices, my lc2 is reading 1 point off and my grounds are connected correctly,, this is my error
MS v3.0,17 ms2/extra 3.3.3
Thanks again for looking..
TUNER STUDIO V2.6.19 MS2/EXTRA RELEASE 3.3.3 :D
72 Vega GT ls1/ms2
Tinker
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: ms2 afr choices not available

Post by LT401Vette »

How are you connected?
The CAN Error is odd.

Can you post a Comm Debug log?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
waybad
Helpful MS/Extra'er
Posts: 71
Joined: Wed Jan 16, 2013 7:44 pm
Location: Evansville, Indiana

Re: ms2 afr choices not available

Post by waybad »

wireless is how I'm connected,, have to try to do a debug log when I get home,, thanks for looking
TUNER STUDIO V2.6.19 MS2/EXTRA RELEASE 3.3.3 :D
72 Vega GT ls1/ms2
Tinker
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: ms2 afr choices not available

Post by LT401Vette »

What sort of wireless?
BT to RS 232 adapter?

Not through another board of any type?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
waybad
Helpful MS/Extra'er
Posts: 71
Joined: Wed Jan 16, 2013 7:44 pm
Location: Evansville, Indiana

Re: ms2 afr choices not available

Post by waybad »

RS232,, I started a new project then loaded current project and it cleared the problem,, thanks again for everyones time!!
Tinker
TUNER STUDIO V2.6.19 MS2/EXTRA RELEASE 3.3.3 :D
72 Vega GT ls1/ms2
Tinker
Post Reply