What would cause the Overrun Filter to come on during WUE wizard if Overrun fuel cut is not enabled. This is an MS3 running 1.4 firmware. Couldn't find any info in the manual on this.
TIA
WUE Wizard Question
Moderator: LT401Vette
-
whittlebeast
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
-
Mario
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: WUE Wizard Question
Thanks Andy.
Will anything besides overrun fuel cut throw an overrun flag? That shouldn't require an MSQ and Datalog to answer, I posted the ECU model and Firmware being used.
Will anything besides overrun fuel cut throw an overrun flag? That shouldn't require an MSQ and Datalog to answer, I posted the ECU model and Firmware being used.