Page 1 of 1

WUE Wizard Question

Posted: Thu Feb 02, 2017 1:47 pm
by Mario
What would cause the Overrun Filter to come on during WUE wizard if Overrun fuel cut is not enabled. This is an MS3 running 1.4 firmware. Couldn't find any info in the manual on this.

TIA

Re: WUE Wizard Question

Posted: Thu Feb 02, 2017 1:58 pm
by whittlebeast
:msq:

Andy

Re: WUE Wizard Question

Posted: Thu Feb 02, 2017 2:26 pm
by Mario
Thanks Andy.

Will anything besides overrun fuel cut throw an overrun flag? That shouldn't require an MSQ and Datalog to answer, I posted the ECU model and Firmware being used.