No calibrate AFR table ?
Moderator: LT401Vette
-
- Master MS/Extra'er
- Posts: 667
- Joined: Tue Aug 17, 2004 9:56 pm
- Location: Victoria B.C. Canada
- Contact:
No calibrate AFR table ?
I can't seem to find the 'calibrate AFR table'. Well actually I can see it but it's greyed out.
'65 VW Bus with a Subaru EJ20 Turbo conversion , Air to water I/C , LS coils , 14Point7 Spartan 2 & Solid Air Fuel Ratio 52mm gauge.
MS2 Extra V3.0 board
MS2 Extra V3.0 board
Re: No calibrate AFR table ?
In the project settings is wideband selected? Might be set to none or disabled.
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Master MS/Extra'er
- Posts: 667
- Joined: Tue Aug 17, 2004 9:56 pm
- Location: Victoria B.C. Canada
- Contact:
Re: No calibrate AFR table ?
Posted to soon..
Looks like there is a 'Un/Lock Calibration' under 'Tools' that I hadn't looked at.
Thanks for the quick reply
Looks like there is a 'Un/Lock Calibration' under 'Tools' that I hadn't looked at.
Thanks for the quick reply
'65 VW Bus with a Subaru EJ20 Turbo conversion , Air to water I/C , LS coils , 14Point7 Spartan 2 & Solid Air Fuel Ratio 52mm gauge.
MS2 Extra V3.0 board
MS2 Extra V3.0 board
Re: No calibrate AFR table ?
Yep, forgot about that.. I leave mine unlocked all the time..
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: No calibrate AFR table ?
Don't do that... That feature is there to make sure the calibrations are protected from any rogue serial messages. That's rather unlikely now, but in the early days of TunerStudio they were randomly getting scrambled.ol boy wrote:Yep, forgot about that.. I leave mine unlocked all the time..
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".