Struggling to connect
Moderator: LT401Vette
-
- MS/Extra Newbie
- Posts: 9
- Joined: Mon Nov 11, 2013 5:47 pm
Struggling to connect
HI i'm experiencing some difficulty trying to connect to TS, i get the error "receiving invalid data from controller" it will eventually connect and one i'm in all is good. Im using USB-a to USB-b cable for comms has anyone else had this issue
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Struggling to connect
If you can capture a Comm Debug log of TS trying to connect.
- Close TunerStudio.
- Using File Explorer, navigate to your TunerStudioProjects folder
- Delete the file "TunerStudioAppDebug.txt"
- Open TunerStudio, but not the project.
- On the main menu check "Communications --> Comm Debug"
- Open your project and let it try to connect
- Close TunerStudio
TunerStudio will now have recreated the TunerStudioAppDebug.txt with the needed information.
Post that here.
- Close TunerStudio.
- Using File Explorer, navigate to your TunerStudioProjects folder
- Delete the file "TunerStudioAppDebug.txt"
- Open TunerStudio, but not the project.
- On the main menu check "Communications --> Comm Debug"
- Open your project and let it try to connect
- Close TunerStudio
TunerStudio will now have recreated the TunerStudioAppDebug.txt with the needed information.
Post that here.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- MS/Extra Newbie
- Posts: 9
- Joined: Mon Nov 11, 2013 5:47 pm
Re: Struggling to connect
Thanks for the reply, this time took about 10 second but i can take up to a minute sometimes
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Struggling to connect
I do see an issue. I will set up a box with this older firmware to try reproducing.
I will investigate and have more for you tomorrow.
I will investigate and have more for you tomorrow.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- MS/Extra Newbie
- Posts: 9
- Joined: Mon Nov 11, 2013 5:47 pm
Re: Struggling to connect
I have updated the firmware now to the 1.5 and this seems to have cured the issue. Thanks for the reply