I have a 1989 Porsche 911 with a 3.6 l. I am setting up the injector size in tuner studio. Porsche runs a much higher fuel pressure than 43.5 psi that most injectors are flow tested at. Do I use my injector flow rating at 43.5 psi or what they are rated at for my vehicles fuel pressure?
Sent from my iPhone using Tapatalk Pro
Injector size
Moderator: LT401Vette
Re: Injector size
the flow rate they will be at in your install.
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Re: Injector size
The manual says 55psi engine off pump running. And 48psi engine at idle. Which is the proper psi to use?
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: Injector size
You use the higher one. That is the pressure at full throttle.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.