Tunerstudio problem

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
marcj
MS/Extra Newbie
Posts: 4
Joined: Thu Jan 16, 2014 2:03 pm

Tunerstudio problem

Post by marcj »

Hi guys need some help, I'm running ms1 v3 all has been ok etc.....just fitted some cams to my engine so wanted to fiddle with the ecu, tunerstudio has been updated to the latest version, I've had problems connecting my ecu but I finally have, but I've lost my registered version and I can't do anything at all in tunerstudio apart from look at the gauge cluster... No tabs for anything....
benckj
Master MS/Extra'er
Posts: 464
Joined: Mon Dec 19, 2011 3:21 pm

Re: Tunerstudio problem

Post by benckj »

Sounds very strange as tabs, etc are included with free version. I'd start from scratch and download TS again which may avoid a corrupt file.

Jim
Toyota MR2 98 3sgte
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water
marcj
MS/Extra Newbie
Posts: 4
Joined: Thu Jan 16, 2014 2:03 pm

Re: Tunerstudio problem

Post by marcj »

OK, will try that. Thanks Jim.
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Tunerstudio problem

Post by LT401Vette »

Did you by chance put it in dash only mode?

Check the main menu:
Options --> Performance --> Dash Only Mode

That should be unchecked or you will not have anything but a gauge cluster.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
marcj
MS/Extra Newbie
Posts: 4
Joined: Thu Jan 16, 2014 2:03 pm

Re: Tunerstudio problem

Post by marcj »

Yep I'm a dick head lol I had put it in dash only mode whilst messing around.

Thanks for your help.
Post Reply