What I'm really hoping to see someday, is that someone has created a very simple iOS-app, that's able to Wifi/BT-connect to a wireless-equipped MS3x and just/only upload the CurrentTune.msq from an iOS-device.
Icing on the cake would be a (close) copy of TunerStudio's IGN/FUEL table-editor, with a simple Burn-button. No 3D-map functionality either, for simplicity.
Just for those moments you really want to tune a table or something and you don't have your regular tuning PC/laptop at hand.
I can understand this all probably sounds easier then it is but I'm wondering if anything like this is remotely possible?
Am I daydreaming too much or is it a heatstroke?
iOS tune upload app / Table-editor
Moderator: LT401Vette
-
- Experienced MS/Extra'er
- Posts: 372
- Joined: Sat Dec 31, 2011 6:10 am
- Location: Netherlands
- Contact:
iOS tune upload app / Table-editor
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
-
- Master MS/Extra'er
- Posts: 404
- Joined: Tue Dec 30, 2008 9:46 am
- Location: Belgium
- Contact:
Re: iOS tune upload app / Table-editor
I've already asked the guys from RealDash if they had plans in that direction, but alas
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp