I've seen this before, but seems not resolved in v3.0.28.
My personal preference is to disable "CurrentTune" and Difference Reports on my test and development setup.
I used the integrated firmware loaded yesterday to confirm how it would respond to a blank Microsquirt and now all of a sudden, the Difference Report and CurrentTune have re-enabled themselves.
James
Difference report turned itself on
Moderator: LT401Vette
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Difference report turned itself on
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 118
- Joined: Tue Jul 09, 2013 1:01 pm
Re: Difference report turned itself on
I will have to give this a try tomorrow and see if I can recreate it.