Difference report turned itself on

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Difference report turned itself on

Post by jsmcortina »

I've seen this before, but seems not resolved in v3.0.28.
My personal preference is to disable "CurrentTune" and Difference Reports on my test and development setup.

I used the integrated firmware loaded yesterday to confirm how it would respond to a blank Microsquirt and now all of a sudden, the Difference Report and CurrentTune have re-enabled themselves.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Brian H EFI
Helpful MS/Extra'er
Posts: 118
Joined: Tue Jul 09, 2013 1:01 pm

Re: Difference report turned itself on

Post by Brian H EFI »

I will have to give this a try tomorrow and see if I can recreate it.
Post Reply