Easy way to cut fuel during driving
Posted: Wed Sep 20, 2017 8:22 am
Hallo,
i'am not sure if this is the correct subforum, but maybe someone knows.
Is there an quick and easy was to cut off all injectors during driving?
I would like to test some things for tuning purposes and would like to drive around and switch off and on all injectors while driving around for a short time.
e.g. drive at 3000rpm -> press a button/switch/whatever which turns off the injection -> wait a few seconds -> press the button/switch again which reenables injection as normal.
Is something possible?
I'am not talking about injector test mode or something, as i would like to test it in the car, on the road/dyno with everything else doing normal operation.
My initial thought was to recalibration overrun in a special way for it and just modify e.g. a signle parameter which triggers it, but this would mean to change a calibration while driving, doing it with a push button or single key would make things easier and safer.
i'am not sure if this is the correct subforum, but maybe someone knows.
Is there an quick and easy was to cut off all injectors during driving?
I would like to test some things for tuning purposes and would like to drive around and switch off and on all injectors while driving around for a short time.
e.g. drive at 3000rpm -> press a button/switch/whatever which turns off the injection -> wait a few seconds -> press the button/switch again which reenables injection as normal.
Is something possible?
I'am not talking about injector test mode or something, as i would like to test it in the car, on the road/dyno with everything else doing normal operation.
My initial thought was to recalibration overrun in a special way for it and just modify e.g. a signle parameter which triggers it, but this would mean to change a calibration while driving, doing it with a push button or single key would make things easier and safer.