Static/Target rail differential pressure.

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Static/Target rail differential pressure.

Postby maych87 » Fri Sep 29, 2017 6:42 pm

I have a question to something I am pretty sure I have set up correctly because my car runs but i wanted to double check. See the attached picture from my porsche manual.regarding the fuel pressures.

1. The Static/Target rail differential pressure. Should that be 55psi or 48psi (see picture below)

2. For my injector size I am assuming it should be set for the flow rating at the static/target rail differential pressure. Is that correct

Image


Sent from my iPhone using Tapatalk Pro
maych87
Helpful MS/Extra'er
 
Posts: 44
Joined: Sun Feb 26, 2017 2:19 pm

Return to Tuner Studio

Who is online

Users browsing this forum: No registered users and 2 guests