Issue compare tune with version 3.0.50.06

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Suprazz
Master MS/Extra'er
Posts: 499
Joined: Mon Jan 22, 2007 7:58 pm
Contact:

Issue compare tune with version 3.0.50.06

Post by Suprazz »

I have a lot of issue with the latest version of tuner studio.
I'm on my bench test and I want to reload different tunes and tunerstudio pop-up the compare tool. WHen I press send tuner settings most of the time it keep failing and popping the compare tune menu again.

if I close everything and I'm able to load the tune and test the ecu. Everything is fine.

If I power cycle the ecu, the tune compare can pop up again with odd parameters (while everything was fine just before the power cycle and no parameters changed)..
Best looking and most advanced CAN-bus gauge
Toyota Supra 7MGE, 7M-GTE and 1JZ-GTE Plug and play ECUs: http://www.perfecttuning.net
Serial to Bluetooth or Serial to WiFi
DIYAutotune Canadian, EFI Source and ECUMaster reseller!
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Issue compare tune with version 3.0.50.06

Post by LT401Vette »

The beta 3.0.50.06 is the 1st that is truly from the beta branch, not just a stable front runner.

There is an issue with sending a burning some settings in the wrong order. It can take a couple sends in cases.

It is not a problem with the difference reports, they are what saves the settings from getting lost. So keep that on and there will be a beta update shortly.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Post Reply