Flash Firmware using Wifi and TunerStudio MS

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Flash Firmware using Wifi and TunerStudio MS

Postby Manu » Sat Oct 14, 2017 7:32 am

Hello,

Just a quick message to let people know that flashing a firmware over Wifi work well.

I just flash a Microsquirt Module. It was the first flash of the module that normally ask for a power-off when using command line MS2loader.
Using TunerStudio MS, it don't ask for a power-off and everything work well.

I just notice that when one use TunerStudio MS firmware update utility, at the moment when TS really send the firmware, the "Next" button is available. I don't try to click it until the entire firmware was loaded so I don't know what can happen if this button is "clicked" when TS send firmware. To be honest, I would prefer this button to appear ONLY when firmware is entirely send to the ECU.

Best regards,
Manu
I can supply, repair or upgrade Megasquirts in FRANCE.

Image
https://www.megasquirt.fr
User avatar
Manu
Master MS/Extra'er
 
Posts: 394
Joined: Mon Feb 15, 2010 4:57 am
Location: Alès - France

Re: Flash Firmware using Wifi and TunerStudio MS

Postby LT401Vette » Sun Oct 15, 2017 8:12 am

Yes, I have tested over wifi. Always seems to work, but takes for ever...

I am still much more comfortable with a real cable.

I just notice that when one use TunerStudio MS firmware update utility, at the moment when TS really send the firmware, the "Next" button is available. I don't try to click it until the entire firmware was loaded so I don't know what can happen if this button is "clicked" when TS send firmware. To be honest, I would prefer this button to appear ONLY when firmware is entirely send to the ECU.


The Next Button should not work until it is done. It should pop up a message if you try.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
User avatar
LT401Vette
Super MS/Extra'er
 
Posts: 10338
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC

Re: Flash Firmware using Wifi and TunerStudio MS

Postby Manu » Sun Oct 15, 2017 8:57 am

LT401Vette wrote:Yes, I have tested over wifi. Always seems to work, but takes for ever...

It may depend of the adapter. I didn't notice any latency or "long" flash with mine.

LT401Vette wrote:The Next Button should not work until it is done. It should pop up a message if you try.

Glad to know. Would it be better to hide it until flash is complete ?
I can supply, repair or upgrade Megasquirts in FRANCE.

Image
https://www.megasquirt.fr
User avatar
Manu
Master MS/Extra'er
 
Posts: 394
Joined: Mon Feb 15, 2010 4:57 am
Location: Alès - France


Return to Tuner Studio

Who is online

Users browsing this forum: No registered users and 2 guests