Shadow Dash gauge needles are miss aligned

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Shadow Dash gauge needles are miss aligned

Postby TroyKreft » Sat Oct 21, 2017 1:36 pm

Trying to develop my 1st dash screen in portrait. All the gauge needles are to the right of center when brought up on shadow dash?

When developing the dash, I had 2 video monitors stacked to try to get close as possible to the tablet screen resolution, but I can only get the studio display resolution up to 1536x1999.

I'm installing this screen as the home_portrait.dash, as I don't have a MS3 to plug into yet.

Also, a side note, is there a way to add more pens to the trend? How do I change the length of time the trend displays for? If this leads to editing content in files, then send me a link for noobs on editing whatever files.

Dash v1.5.02
Studio 3.0.28
Galaxy Tab S3 2048x1536
Attachments
portrait.png
portrait.png (492.6 KiB) Viewed 184 times
Buick GN Building: 250ci, champ aluim heads/champ ported, BGC intake ported by champ, E85, 160lb inj, comp 218/212 hyd roller, Precision 6870cea BB 4bolt, PTC non-lock, Janis trans, 1350 yoked shaft, liq intercooler, ATR header & exhaust, MS3 Pro ECU w traction control, HRparts rear suspension
TroyKreft
MS/Extra Newbie
 
Posts: 14
Joined: Sun Oct 09, 2016 12:18 pm

Re: Shadow Dash gauge needles are miss aligned

Postby LT401Vette » Sun Oct 22, 2017 5:02 am

Quite peculiar.
Do you have the .dash file for us to try here?

The current Line Graph doesn't have any scaling.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
User avatar
LT401Vette
Super MS/Extra'er
 
Posts: 10389
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC

Re: Shadow Dash gauge needles are miss aligned

Postby TroyKreft » Sun Oct 22, 2017 7:31 am

Here you go.
Attachments
S3 2pg.dash
(294.49 KiB) Downloaded 5 times
Buick GN Building: 250ci, champ aluim heads/champ ported, BGC intake ported by champ, E85, 160lb inj, comp 218/212 hyd roller, Precision 6870cea BB 4bolt, PTC non-lock, Janis trans, 1350 yoked shaft, liq intercooler, ATR header & exhaust, MS3 Pro ECU w traction control, HRparts rear suspension
TroyKreft
MS/Extra Newbie
 
Posts: 14
Joined: Sun Oct 09, 2016 12:18 pm

Re: Shadow Dash gauge needles are miss aligned

Postby turbogrill » Tue Oct 24, 2017 8:40 pm

Same thing happened to me!

I stopped using Shadow dash, it looked like crap.

Dash looked great in Tunerstudio be very flaky in Shadow Dash.
turbogrill
Helpful MS/Extra'er
 
Posts: 50
Joined: Thu Aug 18, 2016 5:40 am

Re: Shadow Dash gauge needles are miss aligned

Postby sschutte » Fri Oct 27, 2017 12:54 pm

Thanks for reporting the bug. I was able to reproduce the issue locally. My testing showed that the problem seems to be isolated to gauges with needle images. The temporary Workaround is to clear needle images and set needle color:
1) Select all your needle gauges (hold CTRL + left click on each gauge)
2) Right click any of the selected gauges > Dashboard Designer > Needle Image > Click Clear>Apply>Done
3) Right click any of the selected gauges > Dashboard Designer > Color Dialog > Needle Color > Select color
4) Save and export updated dash
5) Update SD to use new dash file

Attached is your an updated version of your dash.
Attachments
S3 2pg_Updated.dash
Updated dash with needle images removed
(281.36 KiB) Downloaded 8 times
sschutte
MS/Extra Newbie
 
Posts: 8
Joined: Mon Jun 27, 2016 7:51 am

Re: Shadow Dash gauge needles are miss aligned

Postby TroyKreft » Mon Oct 30, 2017 4:43 pm

Cool the file works great.
Buick GN Building: 250ci, champ aluim heads/champ ported, BGC intake ported by champ, E85, 160lb inj, comp 218/212 hyd roller, Precision 6870cea BB 4bolt, PTC non-lock, Janis trans, 1350 yoked shaft, liq intercooler, ATR header & exhaust, MS3 Pro ECU w traction control, HRparts rear suspension
TroyKreft
MS/Extra Newbie
 
Posts: 14
Joined: Sun Oct 09, 2016 12:18 pm


Return to Tuner Studio

Who is online

Users browsing this forum: No registered users and 2 guests