Offline changes lost

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Suprazz
Master MS/Extra'er
Posts: 499
Joined: Mon Jan 22, 2007 7:58 pm
Contact:

Offline changes lost

Post by Suprazz »

While I'm tuning a car, I noticed that this happen often. On a ms3pro and on an ms2.

If I do changes offline, as soon as I connect I loose I my changes without being notified that the ecu and the tunerstudio settings are different.
This is very annoying.

Tuner studio version is 3.0.28.
I'll try to upgrade to 3.0.50.17
Best looking and most advanced CAN-bus gauge
Toyota Supra 7MGE, 7M-GTE and 1JZ-GTE Plug and play ECUs: http://www.perfecttuning.net
Serial to Bluetooth or Serial to WiFi
DIYAutotune Canadian, EFI Source and ECUMaster reseller!
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Offline changes lost

Post by LT401Vette »

Make sure you don't have "Difference reporting" or "Automatically load and save Current Tune" turned off.

Options --> Preferences --> Perform Difference Report on Connect

Options --> Preferences --> Automatically load and save Current Tune

Both need to be checked to always be prompted on a difference.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Suprazz
Master MS/Extra'er
Posts: 499
Joined: Mon Jan 22, 2007 7:58 pm
Contact:

Re: Offline changes lost

Post by Suprazz »

Thanks! Perform Difference Report on Connect was unchecked for an unknown reason!
Best looking and most advanced CAN-bus gauge
Toyota Supra 7MGE, 7M-GTE and 1JZ-GTE Plug and play ECUs: http://www.perfecttuning.net
Serial to Bluetooth or Serial to WiFi
DIYAutotune Canadian, EFI Source and ECUMaster reseller!
Post Reply