Odometer and Trip on Raspberry Pi 3 Dash
Moderator: LT401Vette
-
- Helpful MS/Extra'er
- Posts: 142
- Joined: Tue Feb 14, 2017 2:23 pm
- Location: Manchester, England
Odometer and Trip on Raspberry Pi 3 Dash
Hi guys. So i tweaked one of the standard dashes in TunerStudio to add an Odometer and also a Trip meter. they both work fine on my Ubuntu netbook, but don't increment at all on my Raspberry Pi 3 running Raspbian Stretch. The speedo works fine along with everything else, just not these. I was thinking its maybe a permissions problem. Any of you out there that run this kind of setup, that could possibly help me out would be appreciated. Ive posted my dash file and tune file if that helps.
- Attachments
-
- Good_Tune.msq
- My latest tune.
- (276.37 KiB) Downloaded 29 times
-
- Blue_Pi_Dash.dash
- My tweaked dash.
- (156.62 KiB) Downloaded 36 times
-
- Helpful MS/Extra'er
- Posts: 142
- Joined: Tue Feb 14, 2017 2:23 pm
- Location: Manchester, England
Re: Odometer and Trip on Raspberry Pi 3 Dash
Flipping eck guys, I can't believe you made me ask for help on Facebook for this issue haha. Anyway it's sorted now. I had the speed sensor input in the datalogging menu set to GPS speed instead of VSS1.
Sent from my WAS-LX1A using Tapatalk
Sent from my WAS-LX1A using Tapatalk
-
- Experienced MS/Extra'er
- Posts: 265
- Joined: Sun Dec 23, 2012 2:20 pm
- Location: Nordmaling, Sweden
Re: Odometer and Trip on Raspberry Pi 3 Dash
Thanks for your feedback, wish all would do that when they find a solution!
Martin, Sweden
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle...
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle...