Odometer and Trip on Raspberry Pi 3 Dash

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Odometer and Trip on Raspberry Pi 3 Dash

Postby MegaMicra » Mon Jan 08, 2018 8:48 am

Hi guys. So i tweaked one of the standard dashes in TunerStudio to add an Odometer and also a Trip meter. they both work fine on my Ubuntu netbook, but don't increment at all on my Raspberry Pi 3 running Raspbian Stretch. The speedo works fine along with everything else, just not these. I was thinking its maybe a permissions problem. Any of you out there that run this kind of setup, that could possibly help me out would be appreciated. Ive posted my dash file and tune file if that helps.
Attachments
Good_Tune.msq
My latest tune.
(276.37 KiB) Downloaded 2 times
Blue_Pi_Dash.dash
My tweaked dash.
(156.62 KiB) Downloaded 4 times
MegaMicra
Helpful MS/Extra'er
 
Posts: 124
Joined: Tue Feb 14, 2017 2:23 pm
Location: Manchester, England

Re: Odometer and Trip on Raspberry Pi 3 Dash

Postby MegaMicra » Fri Jan 12, 2018 9:29 am

Flipping eck guys, I can't believe you made me ask for help on Facebook for this issue haha. Anyway it's sorted now. I had the speed sensor input in the datalogging menu set to GPS speed instead of VSS1.

Sent from my WAS-LX1A using Tapatalk
MegaMicra
Helpful MS/Extra'er
 
Posts: 124
Joined: Tue Feb 14, 2017 2:23 pm
Location: Manchester, England

Re: Odometer and Trip on Raspberry Pi 3 Dash

Postby SwedCharger-67 » Fri Jan 12, 2018 10:19 am

Thanks for your feedback, wish all would do that when they find a solution! :D
Martin, Sweden
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle... :D
SwedCharger-67
Helpful MS/Extra'er
 
Posts: 94
Joined: Sun Dec 23, 2012 2:20 pm
Location: Nordmaling, Sweden


Return to Tuner Studio

Who is online

Users browsing this forum: No registered users and 1 guest