Updated firmware now fast accel and fast decel are crossed o

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
maych87
Helpful MS/Extra'er
Posts: 62
Joined: Sun Feb 26, 2017 2:19 pm

Updated firmware now fast accel and fast decel are crossed o

Post by maych87 »

Updated firmware to 1.5.1. I was using the beta version before. After updating fast accel and fast decel are crossed out please help. See picture below.

Image


Sent from my iPhone using Tapatalk Pro
sschutte
Helpful MS/Extra'er
Posts: 83
Joined: Mon Jun 27, 2016 7:51 am

Re: Updated firmware now fast accel and fast decel are cross

Post by sschutte »

This looks like a customized dash. Those indicators/Output channels have most likely changed on the new firmware. Create a new dashboard using the firmware default and copy the new indicators that work to your customized dashboard.
vw_chuck
Master MS/Extra'er
Posts: 633
Joined: Wed Dec 11, 2013 1:16 pm

Re: Updated firmware now fast accel and fast decel are cross

Post by vw_chuck »

They took them out in 1.5.1
maych87
Helpful MS/Extra'er
Posts: 62
Joined: Sun Feb 26, 2017 2:19 pm

Re: Updated firmware now fast accel and fast decel are cross

Post by maych87 »

Thank you. I noticed that they were gone after I wrote the post and the panic subsided.


Sent from my iPhone using Tapatalk Pro
Post Reply