Fairly simple concept.
I'm looking at a composite log of a 60-2 wheel.There's either an extra tooth or it's missing an additional tooth somewhere. I usually count the number of teeth manually between the two missing tooth gaps, twice, to make sure I get the number right.
It would be great if I could click on any of the teeth in the log, and TS would put numbers on every tooth until the end of the page or the display (both are acceptable), starting with the tooth I clicked. It doesn't need to recongnize the gaps as patterns (so say, it doesn't need to recognize it's a 60-2 wheel; just put a number above every tooth it sees and let me worry about recognizing where the missing teeth are).
Say, something like this (picture from my scope):
Composite logger - Display tooth number above teeth.
Moderator: LT401Vette
Composite logger - Display tooth number above teeth.
The man behind MS Labs
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Composite logger - Display tooth number above teeth.
I was discussing a similar idea with Andy Whittle a few months ago.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Composite logger - Display tooth number above teeth.
Seems helpful.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html