Save .msq at the same time with the datalog.

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Save .msq at the same time with the datalog.

Postby Reverant » Mon Feb 12, 2018 1:26 am

Hi,

a very nice feature when capturing a datalog, would be to save the .msq alongside with the datalog, with the same name as the datalog but with the .msq extension.

So let's say the user starts a datalog named "2014-09-07_13.23.50.msl". TunerStudio will also create a file named "2014-09-07_13.23.50.msq" in the same folder, so that the matching map that resulted in this log is available.

MegaLogViewer will also look for the matching .msq when opening a datalog, so that the "current" tables are always shown in the tuning console.

Thoughts?
The man behind MS Labs
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost - InCar PC
User avatar
Reverant
Super MS/Extra'er
 
Posts: 994
Joined: Sat Apr 15, 2006 12:39 am
Location: Athens, Greece

Re: Save .msq at the same time with the datalog.

Postby LT401Vette » Mon Feb 12, 2018 7:18 am

I have thought about that... To embed the msq info into a data log would be nice.

The one point of confusion I see is if the tune was changed during the log.

Should the cal data be from the start of the log or end. Perhaps embed 2 msq snapshots and let the user decide which to use.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
User avatar
LT401Vette
Super MS/Extra'er
 
Posts: 10454
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC

Re: Save .msq at the same time with the datalog.

Postby Reverant » Mon Feb 12, 2018 9:14 am

I think just the start would be sufficient.
The man behind MS Labs
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost - InCar PC
User avatar
Reverant
Super MS/Extra'er
 
Posts: 994
Joined: Sat Apr 15, 2006 12:39 am
Location: Athens, Greece

Re: Save .msq at the same time with the datalog.

Postby BlackBird_SR71 » Mon Feb 12, 2018 9:47 am

I've had this happen to me several times as well. I do remote tuning, and have had the Customer send me a Datalog of the wrong tune. Wastes a lot of time.
BlackBird_SR71
Experienced MS/Extra'er
 
Posts: 161
Joined: Tue Mar 22, 2016 2:26 pm


Return to Tuner Studio

Who is online

Users browsing this forum: No registered users and 1 guest