Is ECU wiring loom lenght important?

This forum is for the discussion of other projects on Megasquirt/Microsquirt hardware that don't fit into any of the other forums

Moderators: jsmcortina, muythaibxr

Post Reply
GGR
Helpful MS/Extra'er
Posts: 57
Joined: Sat Feb 13, 2010 3:42 pm

Is ECU wiring loom lenght important?

Post by GGR »

Hi All,

I have a project where I am fitting a Mercedes M120 V12 out of '93 600SL into a '62 W111 Coupe. I would like to keep the original engine management system for now (2 ECUs - one per cylinder bank - and one ECU for electronic throttle actuation) and look into Megasquirt later, when I have worked out a new intake system and camshafts. I would like however to fit the ECUs in the trunk, together with the battery. That would mean lenghtening the original wiring loom. Will the lenght of the loom affect the nature or quality of the signals from the sensors? I guess Megasquirt versatility can compensate for this, but how will a stock system react to an additional 6 feet of wiring?

Thanks for the help, and Merry Christmas!
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Is ECU wiring loom lenght important?

Post by jsmcortina »

Greater cable length will have at least two effects.
1. voltage drop on high current signals
2. risk of noise pickup

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
GGR
Helpful MS/Extra'er
Posts: 57
Joined: Sat Feb 13, 2010 3:42 pm

Re: Is ECU wiring loom lenght important?

Post by GGR »

Thanks!

How would that translate in real life? Would that really impact how the car runs, or would the effect be marginal?
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: Is ECU wiring loom lenght important?

Post by Matt Cramer »

I've seen an industrial installation where they put the ECU about 50 feet from the engine... and the engine itself was somewhat larger than a Mercedes W111. Not larger than the engine in a Mercedes... larger than the car itself. They didn't have any problems.
Last edited by Matt Cramer on Thu Dec 28, 2017 7:48 am, edited 1 time in total.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Paul_VR6
Super MS/Extra'er
Posts: 1978
Joined: Wed Apr 15, 2009 11:31 am
Location: Oxford, PA
Contact:

Re: Is ECU wiring loom lenght important?

Post by Paul_VR6 »

As long as everything is grounded and shielded well, I don't see an issue.
-Paul
1992 Corrado SLC 3.6 VR6 11.38@120 - MS3 Pro Ultimate - Microsquirt I/O - Can EGT - Racepak IQ3s
kptuned.com - Megasquirting the World! Megasquirt Sales, Service, Tuning and More!
Image
Post Reply