Interested if this board will work well with our adc ports. Since it doesnt say its a 0-5v output it might have lower resolution than an ad595 chip
http://www.adafruit.com/products/269
adafruit thermocoupler
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 121
- Joined: Thu May 19, 2011 2:17 pm
adafruit thermocoupler
MS3 3.8L Buick Turbo V6 -- 1968 Chevelle
MS3 2.4L Honda K24 -- 1991 Toyota MR2
MS3 2.4L Honda K24 -- 1991 Toyota MR2
-
- Super MS/Extra'er
- Posts: 2188
- Joined: Sun Aug 31, 2008 4:02 pm
- Location: South Florida, USA
- Contact:
Re: adafruit thermocoupler
No, that chip uses an SPI (digital) connection, not analog.12lbchevelle wrote:Interested if this board will work well with our adc ports. Since it doesnt say its a 0-5v output it might have lower resolution than an ad595 chip
http://www.adafruit.com/products/269
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: adafruit thermocoupler
Yeah, not only does it use an SPI port but it's a 3.3V device so that's another incompatibility.
Jean
Jean