Not sure where to post this question, but:
Anyone played with mating an MS system with a Rotax 503? I'm interested in using my MS2 (3?) on a 503 and converting it from carbs to FI.
Thanks,
David
using MS on Rotax 503?
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: using MS on Rotax 503?
Just curious.............
Is this for an aircraft?
Ken
Is this for an aircraft?
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
Re: using MS on Rotax 503?
more likely.... I'm not sure I'd want any other efi system running my airplane engine. I'm guessing this is in a LSA type air craft.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
Re: using MS on Rotax 503?
Yes, it is for an air toy.
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: using MS on Rotax 503?
I haven't been into experimental aircraft for a very long time, but I do know that Rotax engines are quite popular for those applications.
Ken
EDIT: At this advanced age I prefer to keep my toys (and other stuff) on the ground.....
Ken
EDIT: At this advanced age I prefer to keep my toys (and other stuff) on the ground.....
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
Re: using MS on Rotax 503?
offtopic: I have other toys for the ground and at 59, I'm becoming bored with them. Besides, I need to travel a lot right now.