Koso Cylinder Temperature Thermistor Interface

This forum is for the discussion of other projects on Megasquirt/Microsquirt hardware that don't fit into any of the other forums

Moderators: jsmcortina, muythaibxr

Post Reply
jesterer
MS/Extra Newbie
Posts: 7
Joined: Mon Sep 21, 2015 3:23 pm

Koso Cylinder Temperature Thermistor Interface

Post by jesterer »

I have one of these temperature sensors that installs under a spark plug.
The device measures out at approximately 50k ohms so I'm pretty sure it's a thermistor.
Has anyone ever hooked one of these up as a spare analog input?
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: Koso Cylinder Temperature Thermistor Interface

Post by Matt Cramer »

I'd check the resistance in boiling water and ice water to see what results you get if you are unable to get a calibration curve from Koso.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply