Hi
Has anyone developed a circuit to multiply the output frequency of the tach driver from a MS2? The Saturn tachometer uses a x3 input frequency of a normal tach.
Ex: The megasquirt outputs a 33.3 hz signal at 1000rpm, The Saturn tachometer wants 100hz signal to display 1000 rpm. The 0-5v square wave is enough to drive the tach.
Changing frequency of output tach signal
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 6
- Joined: Mon Jan 04, 2016 7:21 pm
-
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: Changing frequency of output tach signal
It can be done with a phase-locked-loop (PLL) like a CMOS 4046 and a divide-by-three counter. Maybe somebody knows of a more "off the shelf" solution, I have seen one on my son's bike...