My STM32 Innovate MTS to Megasquirt CAN converter

This forum is for the discussion of other projects on Megasquirt/Microsquirt hardware that don't fit into any of the other forums

Moderators: jsmcortina, muythaibxr

Post Reply
SordFish
Helpful MS/Extra'er
Posts: 62
Joined: Sat Jul 07, 2007 7:53 pm
Location: blackpool - uk

My STM32 Innovate MTS to Megasquirt CAN converter

Post by SordFish »

Its an mbed project based on an STM32F103 board, I used an olimex board with canbus built in.

There are STM32F103 dev boards from china for sub £5, all you would need to add is CAN & RS232 transceivers.

The code is here https://developer.mbed.org/users/sordfi ... _TO_MSCAN/ this is a work in progress!

I've done tests on the bench and it was working in theory but I haven't tested on the car.
MY BLOG
NOT WORKING ON ANY MEGASQUIRT PROJECTS CURRENTLY
Post Reply