Its an mbed project based on an STM32F103 board, I used an olimex board with canbus built in.
There are STM32F103 dev boards from china for sub £5, all you would need to add is CAN & RS232 transceivers.
The code is here https://developer.mbed.org/users/sordfi ... _TO_MSCAN/ this is a work in progress!
I've done tests on the bench and it was working in theory but I haven't tested on the car.
My STM32 Innovate MTS to Megasquirt CAN converter
Moderators: jsmcortina, muythaibxr
My STM32 Innovate MTS to Megasquirt CAN converter
MY BLOG
NOT WORKING ON ANY MEGASQUIRT PROJECTS CURRENTLY
NOT WORKING ON ANY MEGASQUIRT PROJECTS CURRENTLY