Hello all I have a ka24e build and running ms2 with edis4
So I got it started Saturday night and it's only running on cylinders 1 and 2, 3 and 4 are firing constantly on the timing light and no difference in engine running when I pulled the plug wires off 3 and 4. i have the wires going to the correct sides of a brand new acceleration coil pack. Any help is appreciated
Edis 4 firing issue
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Edis 4 firing issue
New does not always equal good... particularly if it's an Accel coil, in my experience.
But I would first confirm your injectors are spraying fuel on all four cylinders.
But I would first confirm your injectors are spraying fuel on all four cylinders.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon May 08, 2017 10:46 pm
Re: Edis 4 firing issue
Yes they are all spraying
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon May 08, 2017 10:46 pm
Re: Edis 4 firing issue
Cylinders 3 and 4 are firing erratically like if you hooked the timing light to a coil before the distributor
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Edis 4 firing issue
Most fancy pants timing lights can't deal with the reverse polarity on the second side of the waste spark coil packs.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke