Cam Angle Trigger Option

This forum is for the discussion of other projects on Megasquirt/Microsquirt hardware that don't fit into any of the other forums

Moderators: jsmcortina, muythaibxr

Post Reply
fiveten
MS/Extra Newbie
Posts: 14
Joined: Mon Aug 08, 2016 1:17 pm

Cam Angle Trigger Option

Post by fiveten »

Hi,

I would like to completely delete my dizzy and would like to know if the tooth on my cam shaft can be used to get the cam angle. f

Imageimages by dennisbdavid, on Flickr

Thanks,
Dennis
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Cam Angle Trigger Option

Post by jsmcortina »

That should work for the cam, what crank wheel do you have?

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
fiveten
MS/Extra Newbie
Posts: 14
Joined: Mon Aug 08, 2016 1:17 pm

Re: Cam Angle Trigger Option

Post by fiveten »

36-1 trigger wheel with a hall sensor.
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Cam Angle Trigger Option

Post by jsmcortina »

You should be good to go then.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply