So, I have been running COP for a while (MS1 and MS2) and this spring went to sequential fuel as well. My car fires 1-3-4-2 and the wiring is set as spark: C,D,A,B so that it fires correctly. So what does the firing order dialog box do? How am I supposed to wire this?
KeithG
sequential settings?
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: sequential settings?
The firing order box is so that the trim tables (numbered by cylinder) apply to the right output.
The outputs are sequenced injA, injB, injC, injD, so should still be wired in firing-order order.
James
The outputs are sequenced injA, injB, injC, injD, so should still be wired in firing-order order.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".