MS3 1.0 source code released

[ScoobyCoder]

James, too late check your inbox

[marioraposo]

I recently bought a ms3 with expansion board that i want to use In a ford Escort.
before that i would like To develop some code and try it In the ms3
If i use the the ms3loader_win32.exe To upload my code, can I upload later the original code of the ms3
Regards
Mario

[jsmcortina]

If i use the the ms3loader_win32.exe To upload my code, can I upload later the original code of the ms3
Regards
Mario

Yes you can.

James

[marioraposo]

Hi James
Thanks for your reply!
Is it possible to have the relationship between the ports and interrupts of the CPU and the inputs and outputs of the MS3, or do I have to get it from the source code you released?
regards
Mario

[jsmcortina]

You need to study the source code and the MC9S12XEP100 datasheet.

James

[marioraposo]

I will do that
Thanks

[thokes82]

Hi James,
Will there be a release of the 1.1 Code one day? I am adding some custom code in the ms3_user.c and it would be great if this option will still be given in future.
OpenSource allways was a key feature of megasquirt 1-3 to me.
Thanks, Thomas - Your fan from Germany

[muythaibxr]

It will eventually be released but not until it is released and we have started on 1.2/2.0.

Ken

[jsmcortina]

With any luck that could be in a couple of months.

James

[marioraposo]

I am trying to upload my code using codewarrior thru the BDM port of ms3. Aparently I must unsecure the chip.
how can I do this?
I know that if I do this later I will have to reflash the bootloader later to use again your firmware.
Regards
Mário

[jsmcortina]

STOP! Do not try to use BDM.

Use the supplied MS3 firmware loader to upload your firmware s19.

James

[scudderfish]

Now that 1.1 is out, is the source near to release? I'd like to read the implementation of the MS side of the CRC checked serial comms.

Regards,
Dave

[jsmcortina]

Now that 1.1 is out, is the source near to release?

Yes, we plan on releasing the source.

James