Wheel request: RV8 4.6 -96
Moderators: jsmcortina, muythaibxr
Wheel request: RV8 4.6 -96
Hi,
I have a Range Rover 4.6 V8 running from the 36-1 crank wheel as semi sequential.
I would like to get it to run sequential if somebody would be interested writing the code for the cam wheel.
I have a Range Rover 4.6 V8 running from the 36-1 crank wheel as semi sequential.
I would like to get it to run sequential if somebody would be interested writing the code for the cam wheel.
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wheel request: RV8 4.6 -96
That wheel mode will take a special decoder due to the cam pattern. Such a shame that they aren't using the 4 long 2 short VW style cam pattern.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Wheel request: RV8 4.6 -96
Do that mean that I have a slim or no change getting sequential? Is there anything I could do?
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wheel request: RV8 4.6 -96
I have written some code that should allow this wheel combination to work.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Wheel request: RV8 4.6 -96
Hi James,
How could I test your code?
-Seppo-
How could I test your code?
-Seppo-
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wheel request: RV8 4.6 -96
Download and install the latest pre-1.3 alpha code.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Wheel request: RV8 4.6 -96
Hi James,
Snow has melted and temperatures are above freezing so it's time to start working on hobby projects again.
Today I tested 1.3release, 1.3alpha9 and 1.4alpha1 and couldn't find spark mode that I could interpret to be suitable for me.
Am I looking from wrong place or otherwise missing something?
Snow has melted and temperatures are above freezing so it's time to start working on hobby projects again.
Today I tested 1.3release, 1.3alpha9 and 1.4alpha1 and couldn't find spark mode that I could interpret to be suitable for me.
Am I looking from wrong place or otherwise missing something?
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Wheel request: RV8 4.6 -96
I think I mentioned how I thought it should be setup in one of the release announcements at the time or by PM. It would use the regular "toothed wheel" decoder.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".