I'm not really good at reading the data trace logs, I still get a bit overwhelmed by them, but I spotted something odd in this data log. Engine is started at 28s, at 31s there is a spike of PW that is not followed by a misfire or rich spike.
This could be a bug in the startup code? I can't find the "crank to run" in the heat of the moment, but I imagine it is around 2s someplace. PWs then drop back to batch levels, then quadruple for full sequential after a little while.
Log and msq attached, running 1.3.0 release code (first time in ages I've run production code!)
Batch on startup, possible glitch/bug
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 884
- Joined: Sat Apr 30, 2011 12:34 pm
- Location: Sandefjord, Norway
Batch on startup, possible glitch/bug
Joachim
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost