MS3 1.3.2 source code released
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
MS3 1.3.2 source code released
To announce the release of source code for MS3 1.3.2
Be sure to read and respect the included README and LICENSE files.
http://www.msextra.com/doc/ms3/files/so ... -1.3.2.zip
You'll need the 2012 build tools available from http://www.msextra.com/tools
If you don't know what source is... this file isn't for you!
Regular users should go to the Downloads page for pre-compiled code instead.
James
Be sure to read and respect the included README and LICENSE files.
http://www.msextra.com/doc/ms3/files/so ... -1.3.2.zip
You'll need the 2012 build tools available from http://www.msextra.com/tools
If you don't know what source is... this file isn't for you!
Regular users should go to the Downloads page for pre-compiled code instead.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MS3 1.3.2 source code released
Great to see this have been made availiable.
Thanks James & co
Thanks James & co
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
Re: MS3 1.3.2 source code released
Great news, thank you!
Quite some time ago (October?) I emailed you a patch to additional CAN I/O (more ADCs, digital inputs and outputs) as I need these for my car.
Is there any chance that if I update the patch to make it work with 1.3.2 you'll merge the patch with the next release (whether the stable 1.3.x or the development 1.4.x branch)?
Quite some time ago (October?) I emailed you a patch to additional CAN I/O (more ADCs, digital inputs and outputs) as I need these for my car.
Is there any chance that if I update the patch to make it work with 1.3.2 you'll merge the patch with the next release (whether the stable 1.3.x or the development 1.4.x branch)?
The man behind MS Labs
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 1.3.2 source code released
I uploaded a patch file to take the source to 1.3.3
EDIT: http://www.msextra.com/doc/ms3/files/so ... -patch.zip
James
EDIT: http://www.msextra.com/doc/ms3/files/so ... -patch.zip
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: MS3 1.3.2 source code released
It seems that I can no longer access the online files directory so without a direct link there is no way to get the patch.
Jean
Jean
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS3 1.3.2 source code released
I added a direct link. However, you can still browse the directory tree, by following the "Old versions" link on the Downloads page.racingmini_mtl wrote:It seems that I can no longer access the online files directory so without a direct link there is no way to get the patch.
Jean
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MS3 1.3.2 source code released
Quick question, I get errors when applying the patches from 1.3.2>1.3.3 and from 1.3.3>1.3.4.
Patch command is complaining about different line endings of the core.ini file. All other source files
patch successfully. Is there a way to fix this? Or can you post a 1.3.4 core.ini file?
Patch command is complaining about different line endings of the core.ini file. All other source files
patch successfully. Is there a way to fix this? Or can you post a 1.3.4 core.ini file?
Re: MS3 1.3.2 source code released
you can find the .ini file in the firmware .zip itself , just skip this file and use the one with the firmware