ms3pro with 'A' command..

prop · Post by **prop** » Sat Aug 23, 2014 8:29 am

Dear All:
It's mid night here....
Got to go to bed!!!

Good night! ;)

grom_e30 · Post by **grom_e30** » Sat Aug 23, 2014 10:43 am

results from an A dump using mini terminal in tuner studio.

Post by **jsmcortina** » Sat Aug 23, 2014 11:34 am

EDIT: scrub that, I have reproduced it.
Turn Megaview temperature units to degF.

James

Post by **jsmcortina** » Sat Aug 23, 2014 11:40 am

Also, I suggest that you re-write your code to use the CRC checked "newserial" protocol instead of the old dumb protocol.

James

grom_e30 · Post by **grom_e30** » Sat Aug 23, 2014 11:51 am

jsmcortina wrote:EDIT: scrub that, I have reproduced it.
Turn Megaview temperature units to degF.

James

that has done it.

jsmcortina wrote:Also, I suggest that you re-write your code to use the CRC checked "newserial" protocol instead of the old dumb protocol.

James

i will look in to it but not sure i have the ability to do this yet.

prop · Post by **prop** » Wed Aug 27, 2014 4:46 am

grom_e30 wrote:results from an A dump using mini terminal in tuner studio.

So u24=55 and u25= 3, That's (55x256+3)x0.1=1408.3 --- Still not a correct tps value!
That's the exact situation I meet now.

prop · Post by **prop** » Wed Aug 27, 2014 4:51 am

jsmcortina wrote:Also, I suggest that you re-write your code to use the CRC checked "newserial" protocol instead of the old dumb protocol.

James

Dear James:
A dumb question:
How I add crc check to 'A' command?
Can you write a sample VB program for A command?

Cheers

Howard

Post by **jsmcortina** » Wed Aug 27, 2014 6:13 am

I don't think I've used VB.

Have a look at this: http://www.msextra.com/doc/pdf/ms3_seri ... l_0.07.pdf

James

grom_e30 · Post by **grom_e30** » Wed Aug 27, 2014 10:51 am

funny that i changed the setting James said and bam was all working correct for me, i am using a ms3 though not a pro.

Megasquirt Support Forum (MSEXTRA)