Hi, in SR20, vvt is on-off. If I set on-off, frequency not "frozen", and if solenoid frequency is different to idle frequency, TS generate the error....
It' no problem for run, but if is possible disable the frequency in vvt on-off is good....
SR20 beta 5 VVT
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: SR20 beta 5 VVT
Please attach an MSQ that demonstrates this and I'll take a look.AbatelliCristian wrote:Hi, in SR20, vvt is on-off. If I set on-off, frequency not "frozen", and if solenoid frequency is different to idle frequency, TS generate the error....
It' no problem for run, but if is possible disable the frequency in vvt on-off is good....
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 855
- Joined: Sun Oct 10, 2010 6:33 am
Re: SR20 beta 5 VVT
This msq generate the error. If you see, vvt frequency is not disabled when vvt is on-off. In reality is not important problem. I set frequency = idle frequency and error is off. But if possible disabled the frequency in vvt on-off, I think is optimal solution.