Turbo ALS need Adjustment

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

esso
Helpful MS/Extra'er
Posts: 65
Joined: Sat May 22, 2010 10:51 pm

Re: Turbo ALS need Adjustment

Post by esso »

any news for the firmware update?
jsmcortina
Site Admin
Posts: 39612
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Turbo ALS need Adjustment

Post by jsmcortina »

esso wrote:any news for the firmware update?
MS3 pre-1.4 alpha 8 came out last week.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
esso
Helpful MS/Extra'er
Posts: 65
Joined: Sat May 22, 2010 10:51 pm

Re: Turbo ALS need Adjustment

Post by esso »

can we have 12x12 tables in the ALS tables as 6x6 is very tight resolution

another bug found during the operation of the ALS:

when the enable input in the ALS is turned off , the car go instantly to rev limit and then go back to normal idle .
because the ALS code is disabled instantly but the kicker take about 1 sec to go back to normal position
to fix this i think disable the ALS switch , the output is disabled and after 1 sec and ALS code is disabled so the car will not go through the rev limit ( the fact that the kicker press 40% of the TPS)
jsmcortina
Site Admin
Posts: 39612
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Turbo ALS need Adjustment

Post by jsmcortina »

:msq:
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply