blend curve (4)

[AbatelliCristian]

Hi guys,
I use blend 4 for change ign based gear in turbocharger engine.
In log I see no correct value ign timing.
You can see in 3a gear I have bland 0 and in theory I work with table1 but the degress not correspond with table....
I make some errors of interpretation?

[jsmcortina]

Looks ok to me from that log?

Take time 49402.445
SPK: Spark Table 1 = 14.9 deg
SPK: Spark Table 3 = 6.7 deg

Gear = 4 -> 50% blend
SPK: Base Spark Advance = 10.8 deg
(14.9 + 6.7) / 2 = 10.8

James

[AbatelliCristian]

the problem is in GEAR 3.. no respect the first table
gear4 is ok

[jsmcortina]

Still looks ok to me:
Take time 49398.348
SPK: Spark Table 1 = 16.9 deg
SPK: Spark Table 3 = 7.8 deg

Gear = 3 -> 0% blend
SPK: Base Spark Advance = 16.9 deg

James

[AbatelliCristian]

I don't understand.. at 49399,707 sparktable1 indicate 16.8, but in table msq is 13,2-15,7-14,5-16,1 (interpolation 4 cell)

[jsmcortina]

Are you sure that's the exact MSQ? If there is a problem, it doesn't look like it is due to blending, the field "SPK:Spark Table 1" is showing the same number.

James

[AbatelliCristian]

I re-make new log with new msq for security. I update you tomorrow
Very thanks