Feature request full sequential without cam sensor on 5cyl
Moderators: jsmcortina, muythaibxr
Feature request full sequential without cam sensor on 5cyl
Why not to lose cam sensor if it's not needed? It would be cheaper to install and less things can go wrong. Cam phase should be extremely easy to detect during cranking. Check out this tooth log. You can clearly distinguish when missing tooth is near compression stroke or near exhaust stroke.
Audi 100 5cyl 10v. MS3X.
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Feature request full sequential without cam sensor on 5c
It might look kind-of ok in that log, but would it be reliable under all conditions? I doubt it.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Feature request full sequential without cam sensor on 5c
The human brain is incredibly good at seeing patterns so it seems obvious when looking at it. But trying to implement this pattern recognition in a reliable and efficient manner is a completely different ball game. Just try to formalize this in a way that would be obvious for a blind person and you may get an idea of the complexity.
Jean
Jean