Ford TFI distributor for crank and cam signal?

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
Rickster
Helpful MS/Extra'er
Posts: 112
Joined: Wed May 16, 2012 8:31 pm

Ford TFI distributor for crank and cam signal?

Post by Rickster »

I read a post from Matt C here:

http://mustangforums.com/forum/5-0l-197 ... butor.html

I was curious if this was ever added? Can you use the TFI distributor to output RPM and cam sync to MS?

Thanks,
Rick
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Ford TFI distributor for crank and cam signal?

Post by jsmcortina »

Signature PIP for sequential fuel has been supported for a long time.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply