I remember reading a post here a while back that I've searched for and can't find it. It was about the size of the "output channel" data block coming close to a limit (512 bytes?) and how changes would need to be made for it to exceed that limit.
The needed changes - are those in the MS firmware, tuning software, or both?
Now that the 1.4 source has been released I'd like to do some customizations, including adding some values to that data block. If changes need to be made on the MS3 side I can handle it (hopefully), but of course I can't change Tunerstudio.
MS-TS data block size issue
Moderators: jsmcortina, muythaibxr
MS-TS data block size issue
Eric Law
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
1990 Audi 80 quattro with AAN turbo engine: happily running on MS3+MS3X
2012 Audi A4 quattro, desperately in need of tweaking
Be alert! America needs more lerts.
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS-TS data block size issue
There's hardcoding in TunerStudio that prevents this currently.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".