Feature request: progressive fuel cut for overboost

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
dontz125
Super MS/Extra'er
Posts: 4221
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:
Contact dontz125

Re: Feature request: progressive fuel cut for overboost

Post by dontz125 »

So assuming a 210 rpm soft zone and a 4-cyl engine, it drops one cyl, completely and permanently until back below the limits, every 70 rpm?
Temporarily shut down - back soon!
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
Top
jsmcortina
Site Admin
Posts: 39617
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Re: Feature request: progressive fuel cut for overboost

Post by jsmcortina »

That's the kind of idea yes. Using a larger zone is likely more effective too.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
slow_hemi6
Super MS/Extra'er
Posts: 4122
Joined: Fri May 07, 2004 3:33 am
Location: Australia

Re: Feature request: progressive fuel cut for overboost

Post by slow_hemi6 »

Thanks for info James, So this is only applicable to sequential injection where you have individual cylinder control.
Find the Manuals up top under Quick links: Manuals. :RTFM:
Cheers Luke
Top
Post Reply

Return to “MS3 Development”