Subaru STI 2 VVT

[jsmcortina]

The second VVT input may work already as you say it has a regular tooth pattern.

James

[AbatelliCristian]

Yes second VVT is 4 regolar tooth. First cam have 2 sensore in stock engine. one for vvt (always 4 tooth) and second for phase.

[AbatelliCristian]

HI James, I attach log for primary cam.
Hi have idea for semplify your work: At the moment in vvt setting page I can select only "main cam" for vvt1. if I have the opportunity to select other input, I can use the thirted VR sensor with regular tooth ( if you remembar subaru have 3 sensor on cam. One for phase and 2sensor with regular tooth for vvt).

[AbatelliCristian]

Hi,
news for VVT subaru?

[AbatelliCristian]

News?

[AbatelliCristian]

I do not understand why I do not get answers.
No more than respond to my customers.

[DeadStiff]

Might be best to start a new thread and link back to this one seeing as this thread is 6 months old.

[juansh2385]

Probably the post has escape from James mind with all the things he has on the todo list.

I know is not ideal but if you are in a hurry is it not posible to modify the 4 tooth patter to grinding one tooth making it a 4-1 and match the pattern that is already supported?


Juan

[AbatelliCristian]

I know is not ideal but if you are in a hurry is it not posible to modify the 4 tooth patter to grinding one tooth making it a 4-1 and match the pattern that is already supported?

Is impossible. At the moment...

[jsmcortina]

Did you ever try my suggestion of using the uneven cam as the main cam input and the regular cam as the second cam input?

I re-read the topic and didn't see an answer to that.

James

[AbatelliCristian]

Yes, I have tried, but if I use 36-2-2-2VVT the engine not start. Ther's problem with sync.