Bmw S62 decoder

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
juansh2385
Master MS/Extra'er
Posts: 612
Joined: Fri Feb 25, 2011 4:28 pm

Bmw S62 decoder

Post by juansh2385 »

Hi James i have a question about the cam signal. which does the decoder expect for main cam input. The 2 exhaust cams have a 8-1 wheel and the intake cam have 6 evenly space wheel. And in what what procesor pin does the code expect the others cam signals.
Last edited by juansh2385 on Sun May 29, 2016 6:41 am, edited 1 time in total.
Top
jsmcortina
Site Admin
Posts: 39619
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Re: Bmw S62 decoder

Post by jsmcortina »

One of the 8-1 wheels will need to be primary. The others connect per your settings.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
ragepower
Experienced MS/Extra'er
Posts: 280
Joined: Fri Dec 17, 2010 9:13 am
Location: Leiria - Portugal

Re: Bmw S62 decoder

Post by ragepower »

juansh2385 wrote:Hi James i have a question about the cam signal. which does the decoder expect for main cam input. The 2 exhaust cams have a 8-1 wheel and the intake cam have 6 evenly space wheel. And in what what procesor pin does the code expect the others cam signals.
That engine has dual vanos and a crank position sensor.
Check my post.

http://www.msextra.com/forums/viewtopic ... 31&t=56041
Top
Post Reply

Return to “MS3 Development”