Bmw S62 decoder
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 612
- Joined: Fri Feb 25, 2011 4:28 pm
Bmw S62 decoder
Hi James i have a question about the cam signal. which does the decoder expect for main cam input. The 2 exhaust cams have a 8-1 wheel and the intake cam have 6 evenly space wheel. And in what what procesor pin does the code expect the others cam signals.
Last edited by juansh2385 on Sun May 29, 2016 6:41 am, edited 1 time in total.
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Bmw S62 decoder
One of the 8-1 wheels will need to be primary. The others connect per your settings.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Experienced MS/Extra'er
- Posts: 280
- Joined: Fri Dec 17, 2010 9:13 am
- Location: Leiria - Portugal
Re: Bmw S62 decoder
That engine has dual vanos and a crank position sensor.juansh2385 wrote:Hi James i have a question about the cam signal. which does the decoder expect for main cam input. The 2 exhaust cams have a 8-1 wheel and the intake cam have 6 evenly space wheel. And in what what procesor pin does the code expect the others cam signals.
Check my post.
http://www.msextra.com/forums/viewtopic ... 31&t=56041