Feature request: Boost by gears target switching
Moderators: jsmcortina, muythaibxr
Feature request: Boost by gears target switching
Hi! Very need boost by gears with target switching. So I will run low boost by gears in city and hi boost by gears in race mode. Thanks!
Last edited by TurboFan on Sun Nov 13, 2016 3:20 pm, edited 1 time in total.
BMW 525i, stroker 2.8L, MS3-Pro 1.4.1, BIPs 373, 66mm turbo 30 psi
Re: Feature request: Boost by gears table switching
Already in there. Not table switching, but boost by gear is already a feature.
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
Re: Feature request: Boost by gears table switching
If I understand it correctly, he needs 2 sets of boost by gear targets, and needs to be able to switch between those sets ie with a switch.
The man behind MS Labs
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
Re: Feature request: Boost by gears table switching
Loop function or Blend table would work for boost switching by gear.
2000 Suzuki Hayabusa turbo MS3 beta testing Plug and Play standalone
http://interfacepnp.webs.com/
http://www.youtube.com/Busams
http://interfacepnp.webs.com/
http://www.youtube.com/Busams
Re: Feature request: Boost by gears table switching
Yes you are right.Reverant wrote:If I understand it correctly, he needs 2 sets of boost by gear targets, and needs to be able to switch between those sets ie with a switch.
Not working with Boost by gears setup.turbo355 wrote:Loop function or Blend table would work for boost switching by gear.
Firstly when I stacked with this problem was shocked - so powerful ECU didn't get ability to switch boost by gears targets for street and race purposes.
BMW 525i, stroker 2.8L, MS3-Pro 1.4.1, BIPs 373, 66mm turbo 30 psi
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Feature request: Boost by gears table switching
Would be cool to have a boost by gear dual table option. I would use this on my street car
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control