MS3 pre-1.5 alpha 5 released

[LT401Vette]

By the way, TS tells me that i have used the maximum of 64 (i think it was?) logging fields, even though im not using the full 128 bytes of log data.
Can that be easily expanded so the full 128 bytes can be used?

There are only 119 bytes available for logging data and most fields are two bytes each. I checked your data by hand and it looks like you have around 14 bytes free, so at least 7 more fields would be possible if the field selector allowed more entries.

James

It looks like the trouble here is that the logFieldOffset and logFieldLength arrays can fill up before you get to 119 bytes if you have some single byte channels. Those arrays are only 64 long.

[jsmcortina]

By the way, TS tells me that i have used the maximum of 64 (i think it was?) logging fields, even though im not using the full 128 bytes of log data.

It looks like the trouble here is that the logFieldOffset and logFieldLength arrays can fill up before you get to 119 bytes if you have some single byte channels. Those arrays are only 64 long.

Exactly, it was a firmware limitation.

For the next release I've extended that array to 100 elements.

James

[jsmcortina]

There's a critical bug that breaks the "Programmable on/off outputs 2" if using MAF. I'll get this fixed and release alpha 6 soon.

James

[MWPau]

thanks guys.

Move from 1.4.1 back to the next alpha once the next couple of racing events im entering are finished.